766.jpg (15783 bytes)Surface Mount Series 766
(Narrow Body)

Narrow Body Design
 
Resistance Range:
Standard: 10 Ohm to 1 Meg Ohm
Resistance Tolerance:
Standard: ±2% or 0.5 Ohm (whichever is greater)
Special: 0.25% or 0.3 Ohm (whichever is greater)
Maximum Operating Voltage:
50V not to exceed rated power
Temperature Coefficient:
Standard:
100 Ohm to 1 Meg Ohm
±100PPM/°C typical
10 Ohm to 99 Ohm
±200PPM/°C typical
Operating Temperature Range:
-55°C to +125°C
Dielectric Strength:
100 VAC
Power Rating (Total Network Power):
  8 Pin 14 Pin 16 Pin
@25 Deg. Cel. .9 1.6w 1.8w
@70 Deg. Cel. .6 1.0w 1.2w
 
Maximum Resistor Power:
(Not to exceed total network power)
Schematic 1 3 5 7
25 Deg. Cel. .12w .24w .12w .12w
70 Deg. Cel. .08w .16w .08w .08w
Bussed CTS Schematic 1
BUSSCHEM1.GIF (913 bytes)

Isolated CTS Schematic 3
ISOSCHEM3.GIF (903 bytes)

Dual Terminator CTS Schematic 5
DUALSCHEM5.GIF (1281 bytes)

R/2R Ladder CTS Schematic 7
R2RSCHEM7.GIF (1195 bytes)

766.gif (5033 bytes)

No. of Pins "A" Dimmension
8 mm 4.90 ± .10
inch .193 ± .004
14 mm 8.65 ± .10
inch .340 ± .004
16 mm 9.90 ± .10
inch .390 + .004
.005
NOTES:

1. Leads to be formed to ±.05mm/±.002in. PLANARITY

2. mm & inch DIMENSIONS ARE NOT EQUIVALENT

3. General Tolerances are:
±0.25mm & ±.010 inch
land1.gif (3679 bytes) Recommended Land Pattern
LEAD
COUNT		 A B C D
8P mm 3.60 5.60 7.60 5.08
in. .140 .220 .300 .200
14P mm 3.60 5.60 7.60 7.60
in. .140 .220 .300 .300
16P mm 3.60 5.60 7.60 8.90
in. .140 .220 .300 .350